Materials, Precision & Services — No Fluff, Just Specs

±0.005mmMax Precision on Critical Dimensions

Holding tight tolerances for 5 axis CNC turning and milling parts on 5-axis machining centres, verified by CMM.

48hDrawing Review

Send a drawing, get engineering feedback and a firm quote within 48 hours.

5–7 DaysPrototype Lead Time

From drawing approval to shipped prototypes. Rush available for urgent parts.

18–25 DaysStandard Air DDP Mass Production

Door-to-door DDP delivery to EU and US. One invoice — export, freight, customs, duties.

2mm → 1,200mmPart Capacity — No MOQ, Any Volume

From micro-machining to large frames, single prototype to million-piece runs.

📦 Materials We Machine

CategoryGradesTypical Applications
Aluminum6061, 6063, 6082, 7075, 2024, MIC-6Housings, brackets, automation fixtures, enclosures
Stainless Steel303, 304, 304L, 316, 316L, 17-4PH, 430Hydraulic fittings, valve bodies, medical precision parts
Carbon & Alloy Steel1018, 1045, 1117, 1144, 4140, 4130, 8620Shafts, bushings, structural components, tooling
Tool & Spring SteelA2, D2, O1, S7, 1095, 5160Tool steel components, fixtures, dies, wear parts
Brass & CopperC360, C260, C464, C110, C145, C172 (BeCu)Connectors, fittings, electrical precision components
TitaniumGrade 2, Grade 5 (6Al-4V), Grade 23Aerospace, medical implants, high-performance components
Engineering PlasticsPEEK, Delrin (POM), Nylon, PTFE, PVC, PC, ABS, AcrylicPrototypes, insulators, bushings, wear components
Other AlloysInconel 625/718, Hastelloy, Monel, Bronze, AmpcoAerospace, oil & gas, chemical processing equipment
Rubber & SiliconeNBR, EPDM, VMQ, FKMSeals, gaskets matched with CNC assemblies

⚙️ Tolerance Capabilities by Process

ProcessStandard ToleranceHigh PrecisionSurface Finish
CNC Milling (3/4/5-axis)±0.05mm±0.005mmRa 0.4μm
CNC Turning (Swiss included)±0.03mm±0.005mmRa 0.2μm
Wire EDM±0.01mm±0.003mmRa 0.1μm
Surface Grinding±0.01mm±0.003mmRa 0.1μm
Drilling & Tapping±0.05mm±0.01mm—

High-precision values depend on part geometry, size and material — we confirm them at drawing review before quoting.

🔧 Our Machine Floor

Machine TypeMachine ClassMax Part Size
5-Axis CNC Mill5-axis machining centres800 × 600 × 500mm
3/4-Axis CNC Mill3/4-axis machining centres1200 × 800 × 600mm
CNC Lathe / SwissSwiss-type lathesØ50 × 300mm (Swiss), Ø300 × 1000mm (Lathe)
Wire EDM—600 × 400 × 300mm
Surface Grinder—600 × 400mm
CMM—Full part inspection

🔬 How We Verify Every Part

📐 CMM Inspection

CMM full dimensional report included with every batch — no extra charge.

🎯 Measured Values

Actual measured values on critical dimensions. Every component verified before shipment.

📋 First Article Inspection

Free with every new part — dimensional, material, and surface finish verification.

📄 Material Certificates

EN 10204 3.1 mill certificates available on request. Full traceability from raw material to finished part.

🏅 ISO 9001:2015

Certified quality management system — three-year audit cycle, certificate no. 93726Q00307R001 (verifiable via cnca.gov.cn).

🔍 In-Process Inspection

Operators check critical features every machining cycle. Defects caught early.

🎨 Finishing Options

FinishApplicationsTypical Parts
Anodizing (Type II / III)Corrosion resistance, wear resistance, colorAluminum housings, brackets
PassivationStainless steel rust preventionStainless precision parts
Electroless NickelHard, uniform coatingHydraulic components, valve bodies
Powder CoatingDurable, thick finishStructural enclosures & frames
Bead BlastingUniform matte finishInstrument housings, cosmetic parts
PolishingMirror finish Ra 0.1μmSealing surfaces & high-precision components
Plating (Zinc, Hard / Decorative Chrome, Gold 99.5%)Corrosion resistance, conductivityFasteners & electrical contact parts
Plasma NitridingWear-resistant case, minimal distortionSteel guides, shafts, tooling
ElectropolishingBright, burr-free, easier to cleanStainless vacuum & hygienic parts
Alodine (Chem Film)Corrosion protection, keeps conductivityAluminum housings, grounding surfaces
Black OxideMatte black, near-zero dimensional changeSteel wear & functional parts

📐 What We Can Handle

Min part size2mm × 2mm × 1mm (micro-machining capable)
Max part size1200mm × 800mm × 600mm (milling)
Min order quantity1 piece (no MOQ)
Max order quantity1,000,000+ pieces (production runs)
Typical batch sizes5 – 50,000 pieces

Three things decide whether your part fits our shop floor

Before price, a buyer needs to know one thing: can this shop actually make my part. In practice that question comes down to three checks — part size against the machine envelope, the tightest tolerance and finish you really need, and whether the geometry has to be cut from several faces in one setup.

  • Size: from micro-machined pins up to 2 mm → 1,200 mm frames, single pieces or series
  • Tolerance: ±0.005 mm on critical dimensions, ±0.1 mm standard for non-critical features
  • Geometry: multi-face parts (housings, manifolds, brackets, fixtures) machined in one setup on 5-axis

If a part sits outside our envelope, we say so at drawing review instead of quoting around it — that is the point of a 48-hour answer.

What we need to quote your part

A quotation is only as good as the drawing behind it. Send these six items and the quote comes back within 48 hours — no back-and-forth on missing details.

  • STEP or 2D drawing with dimension and tolerance callouts (PDF is fine if that is what you have)
  • Material and temper, or the drawing's material note
  • Quantity — prototype, first batch, and the annual volume you expect
  • Surface finish and any heat treatment, anodizing, plating or passivation
  • Critical dimensions you will inspect on incoming inspection
  • Required delivery date and destination country (for DDP options)

There is no minimum order quantity. One prototype and a 500-piece batch are quoted the same way, from the same setup logic.

Where your part goes between operations

Turning, 5-axis milling, Swiss-type turning, grinding, wire EDM and surface finishing run under one roof, which is what keeps a routed part from sitting in transit between subcontractors. Sequencing is decided at drawing review, so a part that needs turning then grinding then anodizing is planned as one route.

Every batch ships with an inspection report: CMM full dimensional report, measured values on critical dimensions, and a free first article inspection report on a new part. EN 10204 3.1 mill certificates are available on request.

One prototype or a series — the same shop, the same report

Around 70% of the part requests that reach us are for 1–100 pieces, so a one-off prototype is normal work here, not an exception. Fixtures and setup documentation stay on file, which is what makes a repeat batch cheaper and faster than the first one.

What moves the price of a part — machine hour rate, the six cost pools, and how unit price falls with quantity — is set out in CNC machining cost.

Production orders ship DDP to the EU and US on one invoice that covers export, freight, customs and delivery — for buyers who would rather not run three separate suppliers for the same shipment.

Frequently Asked Questions

  • Can you machine a single prototype before we commit to a production order?

    Yes. There is no minimum order quantity — a single prototype is quoted and produced the same way as a series. The inspection report, first article inspection and material documentation are the same for one piece as for five hundred.

  • What is the largest part you can machine?

    We cover parts from micro-machined pins up to 1,200 mm frames, across turning, 5-axis milling, grinding and wire EDM. Send the drawing and we will confirm the routing and feasibility within 48 hours — if a feature sits outside our envelope, we will tell you at that point.

  • Can you take a part through several operations without us managing each supplier?

    Yes. Turning, 5-axis milling, Swiss-type turning, grinding, wire EDM and surface finishing are all in one plant, so a routed part moves between operations internally. You get one quotation, one lead time and one shipment — and where the order is DDP, one invoice covering export, freight, customs and delivery.

Ready to Start Your CNC Machining Project?

Send us your drawing. We'll review, optimize, and quote — all within 48 hours.

Get a Quote →