🛢️ Oil & Gas Components

Capabilities at a Glance

Every number below is what we hold on your parts — CMM-verified, with free FAI on your first order.

Tolerance±0.005mm on critical dimensions
MaterialsInconel 625/718 · Stainless 17-4PH · Alloy steel 4140 · Hastelloy. Full material certs including chemistry and mechanical properties.
Process5-Axis CNC Milling
Surface FinishPassivation · Electroless Nickel (available on request); post-machining coating arranged via our partners
InspectionCMM report with measured values · free FAI
Lead Time5–10 months for qualified runs; prototypes faster. DDP door-to-door with one invoice.

What to check before you order Oil & Gas Components

Most quote delays on Oil & Gas Components come from drawings that leave the material condition, the critical tolerances or the inspection documents open. These six points are confirmed before a price is issued.

  1. Material grade and condition: Inconel 625/718 · Stainless 17-4PH · Alloy steel 4140 · Hastelloy. Full material certs including chemistry and mechanical properties.
  2. Critical dimensions and the tolerance tied to them: ±0.005mm is what we hold where the drawing marks a feature critical.
  3. Surface roughness per functional face: Ra 1.6 µm is a typical as-machined value, and finer finishes are quoted on request.
  4. Surface treatment and masking: Passivation · Electroless Nickel (available on request); post-machining coating arranged via our partners
  5. Quantity and delivery: 5–10 months for qualified runs; prototypes faster. DDP door-to-door with one invoice.
  6. Inspection documents: a CMM report with measured values, a free first-article report on new parts, and material certificates on request.

Process window by part type

FeatureTypical toleranceSurface roughnessHow it is verified
High-pressure fittings±0.005mmRa 1.6 µmCMM report, measured values
Valve bodies±0.005mmRa 1.6 µmFree FAI on new parts
Pressure cylinder sleeves±0.005mmRa 1.6 µmIn-process check at each operation
Mating faces and bores±0.005mmRa 1.6 µmCMM plus roughness check
  • High-pressure fittings for Oil & Gas Components are machined from Inconel 625/718 and held to ±0.005mm on critical dimensions.
  • Valve bodies are checked in process at every operation and ship with a CMM report of measured values.
  • First articles for Oil & Gas Components come with a free inspection report, and material certificates are available on request.
  • Orders for Oil & Gas Components start at one piece, because quantity changes the unit price rather than the process.
  • The Dongguan plant that machines Oil & Gas Components holds ISO 9001:2015 certificate 93726Q00307R001.
  • Prototypes of Oil & Gas Components ship in 5–7 business days, and production runs are quoted DDP with one invoice.

Frequently Asked Questions

  • What oil & gas parts can you machine?

    Downhole tool components, valve bodies and trim parts, high-pressure fittings, sensor housings for harsh environments, and connector hardware.

  • What materials do you machine for oil & gas?

    Inconel 625/718, stainless 17-4PH, alloy steel 4140 and Hastelloy — with full material certs including chemistry and mechanical properties.

  • How do you handle high-pressure and harsh-environment requirements?

    Parts are machined to drawing with controlled processes, CMM-verified, and documented — pressure test documentation available on request.

  • What tolerances do you hold on critical sealing and thread features?

    ±0.005mm on critical dimensions with thread-form verification, measured values, full CMM reports included on every order.

  • Can you machine heat-treated and hardened alloys?

    Yes. Pre-hardened stock or post-machining heat treatment via our partners, with hardness verification per your spec.

  • What is the lead time for oil & gas components?

    5–10 months for qualified production depending on material and quantity; prototypes ship faster. Inconel and Hastelloy need longer material lead times.

Buyer's Guide

  • How to Get a Quote for Oil & Gas Components

    Send the drawing with: material grade, service condition (pressure, temperature, environment), quantity, and any cert requirements. Service environment guides material and finish selection.

  • Material Selection Guide

    Inconel 718 for high-temperature strength, 625 for corrosion resistance, 17-4PH for strength with moderate corrosion needs, 4140 for cost-effective bodies. Match grade to downhole or surface service.

  • Machinability tips for Oil & Gas Machining

    Specify thread and seal tolerances realistically, avoid sharp internal corners on pressure parts, and confirm whether parts need post-machining passivation or coating.

  • Quality & Inspection

    CMM inspection with full report, thread verification, measured values, free FAI, material certs included. Pressure documentation available on request.

  • Lead Time & Shipping

    5–10 months for qualified runs, prototypes faster. DDP door-to-door with one invoice — export, customs, duties, last-mile.

What drives the price of Oil & Gas Components

Oil & Gas Components is quoted from the drawing, not from a catalogue: material block size, how many setups the geometry forces, the tolerance class and the batch size set the unit price. Machine-hour rates, material block prices and indicative bands at 1, 10 and 100 pieces are published in our CNC machining cost breakdown, so the number can be checked before a drawing is sent. A drawing review returns a quotation within 48 hours, with no minimum order quantity.

Get a Quote for Oil & Gas Components

Send us your drawing — we review within 48h and return a quote with lead time.

Get a Quote →