5-Axis Machining at TruPart Precision (Dongguan, China) is quoted from the drawing: tolerance ±0.005 mm on critical features; surface finish Ra 0.8–1.6 μm (grinding to Ra 0.4); materials Aluminum 6061/7075, stainless 303/304/316, Ti-6Al-4V, brass, PEEK/POM; batch 1–10,000+ (prototype to production). Every batch is verified — CMM, FAI report with measured values. A drawing review returns a quotation with unit price, machining route, lead time and freight within 48 hours, and there is no minimum order quantity.
- TruPart Precision holds ±0.005 mm on critical features on 5-Axis Machining work, and the measured values are reported per feature on a CMM.
- Surface finish for 5-Axis Machining is Ra 0.8–1.6 μm (grinding to Ra 0.4) as machined; finer finishes are quoted on request rather than assumed.
- Materials used for 5-Axis Machining: Aluminum 6061/7075, stainless 303/304/316, Ti-6Al-4V, brass, PEEK/POM.
- Batch sizes for 5-Axis Machining range 1–10,000+ (prototype to production) — quantity changes the unit price rather than the process.
- Inspection for 5-Axis Machining: CMM, FAI report with measured values.
- 5-Axis Machining at TruPart Precision is quoted from the drawing; a prototype is priced on the same route as a production batch.
- The Dongguan plant that machines 5-Axis Machining holds ISO 9001:2015 certificate 93726Q00307R001.
What We Hold on Your Parts
Every number below is what we hold on your parts — CMM-verified, with free FAI on your first order.
| Tolerance | ±0.005 mm on critical features |
| Surface finish | Ra 0.8–1.6 μm (grinding to Ra 0.4) |
| Size range | Prototype to production — send your drawing for a machine-envelope check |
| Materials | Aluminum 6061/7075, stainless 303/304/316, Ti-6Al-4V, brass, PEEK/POM |
| Equipment | 5-axis CNC machining centers |
| Batch | 1–10,000+ (prototype to production) |
| Inspection | CMM, FAI report with measured values |
Procurement facts — fixed before you order
| Item | What is fixed |
|---|---|
| Minimum order | No minimum order quantity. A single part and a production batch run through the same route. |
| Quotation | Within 48 hours of a drawing or STEP file: unit price, machining route, setup, packed weight and freight itemised. |
| Prototype lead time | 5–7 business days after drawing approval. |
| Production lead time | Confirmed per part and quantity in the quotation, not a catalogue figure. |
| Incoterms | EXW, DDP or air. Freight is quoted before the order, not billed after it. |
| Documentation | Material certificate to EN 10204 3.1 with mill and heat number; CMM report with measured values; FAI report on a new part. |
Batch range as stated on this page: 1–10,000+ (prototype to production)
What moves the unit price of 5-axis CNC machining
A machined part is priced by the work it contains, not by its weight. Five drivers move the number, in this order of magnitude:
| Cost driver | Rises when | Effect on unit price |
|---|---|---|
| Setups | Features sit on more than one face, or the datum has to be re-established | High |
| Tolerance | ±0.005 mm appears on every dimension instead of only the critical ones | Medium to high |
| Stock removal | The part is cut from solid bar or plate instead of a near-net blank | Medium |
| Surface finish | Ra 0.4 µm or tighter, or a coating applied after machining | Medium |
| Batch size | One part carries the whole setup; 100 parts share it | High at quantity 1, falls with volume |
These are magnitudes, not prices. The quotation carries the actual numbers for your drawing, line by line.
What the quotation contains
| Line in the quotation | Why it matters |
|---|---|
| Unit price at your quantity | The same part at 1, 100 and 1,000 pieces priced separately |
| Setup and tooling, listed separately | One-time charges are not folded into the unit price |
| Machining route and lead time | You see which operations decide the date |
| Packed weight and carton size | Freight can be calculated before you commit |
| Freight: EXW, DDP or air | Landed cost known before the order |
In short
- 5-axis CNC machining at TruPart Precision holds tolerances of ±0.005 mm on critical features — measured on a CMM and reported as measured values with every batch.
- A machined part is priced by setups, stock removal and tolerance, not by its weight.
- TruPart Precision returns a 5-axis CNC machining quotation within 48 hours of a drawing, with the machining route and freight itemised.
From our historical RFQ data, around 70% of incoming part requests fall within 1–100 pieces. We support both prototype batches and volume production with no minimum-order requirement. Submit your drawing for feasibility evaluation.
Typical Parts We Machine on 5-Axis
Real demand from our RFQ inbox — cycloidal disc components, reducer housings, modular wheels and freeform brackets are among the most frequent requests we receive for 5-axis work, mostly from robotics and automation projects.
- Cycloidal disc components and eccentric shafts for reducers
- Reducer / gear housings with multi-face
BUYER QUESTIONS
5-axis — where the error on multi-face parts comes from
On a part with features on three, four or five faces, the expensive error is not in any single cut. It is in the re-clamping between them: every new fixture adds its own positional error, and the datum quietly moves. Machining several faces in one setup removes those re-clamping steps instead of trying to compensate for them afterwards.
- Multi-face housings, manifolds, ports and pockets cut without re-clamping between faces
- Positional relationships between faces held from one datum, not re-established per setup
- Freeform surfaces, angles and blend radii reached by the machine axes rather than by special tooling
The buyer-visible result is a part that assembles without hand-fitting, and an inspection report that shows the same datum on every feature.
QUOTING
What we need to quote a 5-axis part
For multi-face work the model matters more than a picture. Send the CAD and these details, and the quotation returns within 48 hours with the routing and the setup plan behind the price.
- STEP or native CAD of the finished part (2D PDF with full callouts is workable if that is all you have)
- Which faces and features are critical, and the datums you inspect from
- Tolerance and surface finish callouts on those features
- Material, temper and any heat treatment
- Quantity — prototype, first batch, expected annual volume
- Anything that must stay unmachined (cast or forged surfaces, cosmetic faces)
Five-axis work is often worth re-checking against a 3-axis route on price: where the geometry does not force multi-face access, we will quote the cheaper route and tell you why.
ORDER SIZE
Prototype, fixture, series
Multi-face parts usually start as one piece for assembly and fit testing. Around 70% of the requests we receive fall in the 1–100 piece range, so a single housing or bracket goes through normal production, with the fixture designed so that the series batch runs from the same setup that was proven on the prototype.
When the geometry is stable, we keep the fixture and the programme on file: repeat batches then hold the same tolerances without re-proving the setup.
portingMATERIALS & FINISH
Materials, hardness and finish for 5-axis parts
Housings, brackets and manifolds run mostly in aluminium 6061 and 7075, stainless 303/304/316, titanium and engineering plastics. Hardened steels are machined where the drawing calls for it, with the finish grinding allowance planned into the route.
Surface treatment is arranged in the same plant — anodizing and hard anodizing for aluminium, passivation for stainless, plating and painting where specified — so a finished part does not have to travel to a second supplier and back.
- Modular wheels, impellers and freeform brackets
Have a similar geometry? Send your STEP file — we review feasibility within 48h and return a quote with lead time.
QUOTING CHECKLIST
What to send for a 5-axis quotation
A 5-axis quotation is built from the datum scheme and the faces that carry the tight features, not from the part weight.
- A 3D model (STEP or IGES) plus a 2D drawing that names the datum scheme
- Which faces carry the tight features, and the tolerance on each of them
- The dimensions that are critical against the ones that are general — the split is what changes the route
- Material and temper, and whether a mill certificate is required
- Quantity and the batch pattern: one prototype, then how many, and how often
- Surface finish and any post-process (anodizing, passivation, coating) with the areas to be masked
- Whether the fixture may be designed by us or has to follow your existing one
Send what you have — a model without a drawing, or a drawing without a model, is enough to start the review.
Frequently Asked Questions
When is 5-axis actually worth it instead of 3-axis?
When the part has features on several faces that must be positioned relative to each other, when re-clamping would put the critical relationship at risk, or when a freeform surface would otherwise need special tooling. For parts that can be reached in three axes, we quote the 3-axis route instead — it is cheaper and no less accurate.
How do you control the relationship between features on different faces?
By cutting those faces in one setup from one datum, so the relationship is produced by the same positioning rather than re-established at each re-clamp. The critical relationships are then measured and reported on the CMM, with actual measured values on the dimensions you inspect.
Can you machine the prototype and the production batch on the same setup?
Yes. The fixture is designed for the part, not for the order size, so the prototype proves the setup that the series batch will use. Fixtures and programmes stay on file, which is why a repeat batch usually comes back faster and at a lower price than the first one.
When does 5-axis machining make sense over 3-axis?
When a part needs features on multiple faces, contoured surfaces or undercuts that a 3-axis mill cannot reach without re-fixturing. A 5-axis center machines those in one setup — no transfer error between setups, fewer fixtures, and better surface finish on freeform geometry. For simple prismatic parts, 3-axis stays more economical.
What tolerances can 5-axis machining hold?
±0.005 mm on critical features, verified on a CMM with a full report. General dimensions run at ±0.05–0.1 mm unless specified.
Can you machine cycloidal discs and gear housings for reducers?
Yes. Cycloidal disc components, reducer housings, modular wheels and eccentric shafts are typical parts we machine for robotics and automation projects — we receive frequent requests for this part family. Send your STEP file and we confirm feasibility within 48h.
How does 5-axis affect part cost?
On complex parts, 5-axis removes multiple setups, fixtures and re-clamping errors, so total cost is often lower than a 3-axis strategy with indexers. On simple block-type parts, 3-axis is the cheaper route. The right call depends on geometry — that is exactly what our drawing review checks before quoting.
What materials can be machined on your 5-axis centers?
Aluminum 6061/7075, stainless 303/304/316, Ti-6Al-4V, brass, and engineering plastics such as PEEK and POM. Titanium and hardened steels are run with rigid setups and low surface speeds.
Do you provide CMM reports with 5-axis parts?
Yes. Every batch is inspected on a CMM with a free FAI report on your first order, and we report measured values on critical dimensions.
PRICING
What drives the price of 5-Axis Machining
5-Axis Machining is quoted from the drawing, not from a catalogue: material block size, how many setups the geometry forces, the tolerance class and the batch size set the unit price. Machine-hour rates, material block prices and indicative bands at 1, 10 and 100 pieces are published in our CNC machining cost breakdown, so the number can be checked before a drawing is sent. A drawing review returns a quotation within 48 hours, with no minimum order quantity.
Have a Similar Part in Mind?
Send us your drawing — we review within 48h and return a quote with lead time.
Get a Quote →