⚙️ Shafts & Transmission Components

Capabilities at a Glance

Every number below is what we hold on your parts — CMM-verified, with free FAI on your first order.

Tolerance±0.005mm on critical dimensions
MaterialsAlloy steel 4140/4340 · Stainless 303/304/316 · Aluminum 6061/7075 · Titanium. Full material certs available on request.
ProcessTurning + Grinding
Surface FinishPrecision Grinding · Bead Blasting · Passivation (available on request); heat treatment (hardening) arranged via our partners
InspectionCMM report with measured values · free FAI
Lead TimePrototypes in 5–7 business days; production per quantity with fast track available. DDP door-to-door with one invoice.

What to check before you order Shafts & Transmission Components

Most quote delays on Shafts & Transmission Components come from drawings that leave the material condition, the critical tolerances or the inspection documents open. These six points are confirmed before a price is issued.

  1. Material grade and condition: Alloy steel 4140/4340 · Stainless 303/304/316 · Aluminum 6061/7075 · Titanium. Full material certs available on request.
  2. Critical dimensions and the tolerance tied to them: ±0.005 mm is what we hold where the drawing marks a feature critical.
  3. Surface roughness per functional face: Ra 1.6 µm is a typical as-machined value, and finer finishes are quoted on request.
  4. Surface treatment and masking: Precision Grinding · Bead Blasting · Passivation (available on request); heat treatment (hardening) arranged via our partners
  5. Quantity and delivery: Prototypes in 5–7 business days; production per quantity with fast track available. DDP door-to-door with one invoice.
  6. Inspection documents: a CMM report with measured values, a free first-article report on new parts, and material certificates on request.

Process window by part type

FeatureTypical toleranceSurface roughnessHow it is verified
Stepped shafts±0.005 mmRa 1.6 µmCMM report, measured values
Threaded shafts±0.005 mmRa 1.6 µmFree FAI on new parts
Transmission shafts±0.005 mmRa 1.6 µmIn-process check at each operation
Mating faces and bores±0.005 mmRa 1.6 µmCMM plus roughness check
  • Stepped shafts for Shafts & Transmission Components are machined from Alloy steel 4140/4340 and held to ±0.005 mm on critical dimensions.
  • Threaded shafts are checked in process at every operation and ship with a CMM report of measured values.
  • First articles for Shafts & Transmission Components come with a free inspection report, and material certificates are available on request.
  • Orders for Shafts & Transmission Components start at one piece, because quantity changes the unit price rather than the process.
  • The Dongguan plant that machines Shafts & Transmission Components holds ISO 9001:2015 certificate 93726Q00307R001.
  • Prototypes of Shafts & Transmission Components ship in 5–7 business days, and production runs are quoted DDP with one invoice.

Frequently Asked Questions

  • What shaft and transmission parts can you machine?

    Shafts, axles, splines, keyed shafts, coupling parts and transmission components with tight concentricity and roundness requirements.

  • What tolerances do you hold on shaft diameters and concentricity?

    ±0.005mm on critical diameters; concentricity and roundness are verified on the CMM between centers and V-blocks with full reports.

  • Can you grind shafts after machining?

    Yes. Precision grinding is part of our process for hardened shafts and fine-finish journals, achieving the surface finish your bearing fit requires.

  • What materials do you machine for transmission parts?

    Alloy steel 4140/4340, stainless 303/304/316, aluminum and titanium. Heat treatment (hardening) is arranged with our partners when specified.

  • How do you cut keyways and splines?

    Keyways are broached or slot-milled to spec; splines are hobbing-compatible or wire-EDM'd per your drawing, verified by inspection.

  • What is the lead time for shaft prototypes?

    Prototypes in 5–7 business days, production runs per quantity with fast track available. Send the drawing for a confirmed schedule.

Buyer's Guide

  • How to Get a Quote for Shafts & Transmission Parts

    Send the drawing with: material and hardness, critical diameters and tolerances, concentricity/roundness requirements, keyway or spline spec, and quantity.

  • Material Selection Guide

    4140/4340 alloy steel for strength and hardenability, stainless for corrosion, aluminum for light-duty, titanium for high-strength light weight. Specify heat treatment if needed.

  • Machinability tips for Shaft Machining

    Use center holes for machining and inspection datums, specify shoulder radii to avoid stress risers, and give grinding allowance on hardened journals.

  • Quality & Inspection

    CMM inspection between centers, roundness and concentricity verified, measured values, free FAI, full dimensional report included.

  • Lead Time & Shipping

    Prototypes 5–7 business days, production per quantity. DDP door-to-door with one invoice — export, customs, duties, last-mile.

What drives the price of Shafts & Transmission Components

Shafts & Transmission Components is quoted from the drawing, not from a catalogue: material block size, how many setups the geometry forces, the tolerance class and the batch size set the unit price. Machine-hour rates, material block prices and indicative bands at 1, 10 and 100 pieces are published in our CNC machining cost breakdown, so the number can be checked before a drawing is sent. A drawing review returns a quotation within 48 hours, with no minimum order quantity.

Get a Quote for Shafts & Transmission Components

Send us your drawing — we review within 48h and return a quote with lead time.

Get a Quote →