🔩 Motor Components & Housings

Capabilities at a Glance

Every number below is what we hold on your parts — CMM-verified, with free FAI on your first order.

Tolerance±0.005mm on critical dimensions
MaterialsAluminum 6061/7075 · Alloy steel · Stainless 303/304 · Brass. Full material certs available on request.
Process5-Axis Milling + Turning
Surface FinishAnodizing · Passivation · Electroless Nickel · Painting per spec (available on request); mass balance correction arranged via our partners when required
InspectionCMM report with measured values · free FAI
Lead TimePrototypes in 5–7 business days; production runs per quantity. DDP door-to-door with one invoice.

What to check before you order Motor Components & Housings

Most quote delays on Motor Components & Housings come from drawings that leave the material condition, the critical tolerances or the inspection documents open. These six points are confirmed before a price is issued.

  1. Material grade and condition: Aluminum 6061/7075 · Alloy steel · Stainless 303/304 · Brass. Full material certs available on request.
  2. Critical dimensions and the tolerance tied to them: ±0.005 mm is what we hold where the drawing marks a feature critical.
  3. Surface roughness per functional face: Ra 1.6 µm is a typical as-machined value, and finer finishes are quoted on request.
  4. Surface treatment and masking: Anodizing · Passivation · Electroless Nickel · Painting per spec (available on request); mass balance correction arranged via our partners when required
  5. Quantity and delivery: Prototypes in 5–7 business days; production runs per quantity. DDP door-to-door with one invoice.
  6. Inspection documents: a CMM report with measured values, a free first-article report on new parts, and material certificates on request.

Process window by part type

FeatureTypical toleranceSurface roughnessHow it is verified
Motor end caps±0.005 mmRa 1.6 µmCMM report, measured values
Bearing seats±0.005 mmRa 1.6 µmFree FAI on new parts
Rotors and shafts±0.005 mmRa 1.6 µmIn-process check at each operation
Mating faces and bores±0.005 mmRa 1.6 µmCMM plus roughness check
  • Motor end caps for Motor Components & Housings are machined from Aluminum 6061/7075 and held to ±0.005 mm on critical dimensions.
  • Bearing seats are checked in process at every operation and ship with a CMM report of measured values.
  • First articles for Motor Components & Housings come with a free inspection report, and material certificates are available on request.
  • Orders for Motor Components & Housings start at one piece, because quantity changes the unit price rather than the process.
  • The Dongguan plant that machines Motor Components & Housings holds ISO 9001:2015 certificate 93726Q00307R001.
  • Prototypes of Motor Components & Housings ship in 5–7 business days, and production runs are quoted DDP with one invoice.

Frequently Asked Questions

  • What motor components can you machine?

    Motor housings, end caps, rotor shaft parts, bearing housings and mounting hardware with tight concentricity and fit tolerances.

  • What tolerances do you hold on bearing seats and mating diameters?

    ±0.005mm on critical dimensions — bearing seats, bore fits and shaft journals — verified on CMM with full reports.

  • What materials do you machine for motors?

    Aluminum 6061/7075 for housings, alloy steel for shafts, stainless for corrosive environments. Electrical steel and magnets are outside our machining scope.

  • How do you ensure shaft concentricity and balance readiness?

    Shafts are machined between centers with concentricity verified by CMM; mass balance correction is done by our partners when required.

  • What surface finishes do you apply to motor parts?

    Anodizing, passivation, electroless nickel and painting per spec. Bearing surfaces are machined to the finish your fit requires.

  • What is your lead time for motor component prototypes?

    Prototypes in 5–7 business days, production runs per quantity. Send the drawing for a confirmed schedule.

Buyer's Guide

  • How to Get a Quote for Motor Components

    Send the drawing with: material, bearing fit and tolerance class, concentricity requirements, surface finish, and quantity. Fit classes matter for motor reliability.

  • Material Selection Guide

    Aluminum 6061/7075 for housings and end caps, alloy steel for shafts, stainless for special environments. Confirm thermal and magnetic requirements early.

  • Machinability tips for Motor Parts

    Specify bearing seat tolerances with defined fit class, add balancing allowance where needed, and design cooling fins with adequate draft for tooling.

  • Quality & Inspection

    CMM inspection with full report, concentricity and fit verified, measured values, free FAI. Batch consistency monitored.

  • Lead Time & Shipping

    Prototypes 5–7 business days, production per quantity. DDP door-to-door with one invoice — export, customs, duties, last-mile.

What drives the price of Motor Components & Housings

Motor Components & Housings is quoted from the drawing, not from a catalogue: material block size, how many setups the geometry forces, the tolerance class and the batch size set the unit price. Machine-hour rates, material block prices and indicative bands at 1, 10 and 100 pieces are published in our CNC machining cost breakdown, so the number can be checked before a drawing is sent. A drawing review returns a quotation within 48 hours, with no minimum order quantity.

Get a Quote for Motor Components & Housings

Send us your drawing — we review within 48h and return a quote with lead time.

Get a Quote →