Titanium Machining at TruPart Precision (Dongguan, China) is quoted from the drawing: tolerance ±0.005 mm on critical dimensions; surface finish Ra 0.8 μm machined, Ra 0.4 μm ground; materials Ti-6Al-4V (Gr5), Ti-6Al-4V ELI (Gr23), commercially pure; batch 1–5,000+. Every batch is verified — CMM, FAI, material certificates, traceability. A drawing review returns a quotation with unit price, machining route, lead time and freight within 48 hours, and there is no minimum order quantity.
- TruPart Precision holds ±0.005 mm on critical dimensions on Titanium Machining work, and the measured values are reported per feature on a CMM.
- Surface finish for Titanium Machining is Ra 0.8 μm machined, Ra 0.4 μm ground as machined; finer finishes are quoted on request rather than assumed.
- Materials used for Titanium Machining: Ti-6Al-4V (Gr5), Ti-6Al-4V ELI (Gr23), commercially pure.
- Batch sizes for Titanium Machining range 1–5,000+ — quantity changes the unit price rather than the process.
- Inspection for Titanium Machining: CMM, FAI, material certificates, traceability.
- Titanium Machining at TruPart Precision is quoted from the drawing; a prototype is priced on the same route as a production batch.
- The Dongguan plant that machines Titanium Machining holds ISO 9001:2015 certificate 93726Q00307R001.
What We Hold on Your Parts
Every number above is what we hold on your parts — CMM-verified, with free FAI on your first order.
| Grades | Ti-6Al-4V (Gr5), Ti-6Al-4V ELI (Gr23), commercially pure |
| Tolerance | ±0.005 mm on critical dimensions |
| Surface finish | Ra 0.8 μm machined, Ra 0.4 μm ground |
| Typical parts | Implants, surgical instruments, aerospace brackets, thin-walled components |
| Tooling | Variable-flute end mills, rigid setups, flood coolant |
| Inspection | CMM, FAI, material certificates, traceability |
| Batch | 1–5,000+ |
Procurement facts — fixed before you order
| Item | What is fixed |
|---|---|
| Minimum order | No minimum order quantity. A single part and a production batch run through the same route. |
| Quotation | Within 48 hours of a drawing or STEP file: unit price, machining route, setup, packed weight and freight itemised. |
| Prototype lead time | 5–7 business days after drawing approval. |
| Production lead time | Confirmed per part and quantity in the quotation, not a catalogue figure. |
| Incoterms | EXW, DDP or air. Freight is quoted before the order, not billed after it. |
| Documentation | Material certificate to EN 10204 3.1 with mill and heat number; CMM report with measured values; FAI report on a new part. |
Batch range as stated on this page: 1–5,000+
What moves the unit price of titanium machining
A machined part is priced by the work it contains, not by its weight. Five drivers move the number, in this order of magnitude:
| Cost driver | Rises when | Effect on unit price |
|---|---|---|
| Setups | Features sit on more than one face, or the datum has to be re-established | High |
| Tolerance | ±0.005 mm appears on every dimension instead of only the critical ones | Medium to high |
| Stock removal | The part is cut from solid bar or plate instead of a near-net blank | Medium |
| Surface finish | Ra 0.4 µm or tighter, or a coating applied after machining | Medium |
| Batch size | One part carries the whole setup; 100 parts share it | High at quantity 1, falls with volume |
These are magnitudes, not prices. The quotation carries the actual numbers for your drawing, line by line.
What the quotation contains
| Line in the quotation | Why it matters |
|---|---|
| Unit price at your quantity | The same part at 1, 100 and 1,000 pieces priced separately |
| Setup and tooling, listed separately | One-time charges are not folded into the unit price |
| Machining route and lead time | You see which operations decide the date |
| Packed weight and carton size | Freight can be calculated before you commit |
| Freight: EXW, DDP or air | Landed cost known before the order |
In short
- Titanium machining at TruPart Precision holds tolerances of ±0.005 mm on critical dimensions — measured on a CMM and reported as measured values with every batch.
- A machined part is priced by setups, stock removal and tolerance, not by its weight.
- TruPart Precision returns a titanium machining quotation within 48 hours of a drawing, with the machining route and freight itemised.
Frequently Requested Materials
Our frequent incoming material requests cover European DIN steels (S235JR, 35B2, X5CrNiCu17), American standard steel (SAE 1010/1020), aluminium 6061/2024, tool steel as well as engineering plastics PC/PVC. Submit your drawing and material requirements for our review.
WHY TITANIUM IS DIFFERENT
What makes titanium slow to machine
Titanium pushes heat into the cutting edge instead of into the chip, so the tool wears faster and cutting speeds stay low. That is the whole reason a titanium part costs more than the same part in aluminium: the machine spends longer on the same feature, rather than the material carrying a premium.
- Heat stays at the cutting edge, so tool life and cutting speed are both limited
- Thin walls and long features deflect, so the setup and the number of passes are chosen to keep the part rigid
- The work-hardened skin has to be cut through in one clean pass instead of being rubbed
- Coolant and toolpath follow the material rather than a standard cycle
Send the drawing and the grade you need and the quotation shows the route the part will actually run on, with the running time behind it, inside 48 hours.
CHOOSING THE GRADE
Which titanium grade fits the part
The grade is decided by the part, not by what happens to be in stock. Ti-6Al-4V covers most structural work; the ELI version is used where more ductility is needed; commercially pure grades suit parts whose job is corrosion resistance.
- Ti-6Al-4V (Gr5): the general-purpose structural grade for brackets, housings and fittings
- Ti-6Al-4V ELI (Gr23): the low-interstitial version, chosen where toughness and ductility carry more weight
- Commercially pure titanium: for parts whose job is corrosion resistance rather than load
- Certificates to EN 10204 3.1 naming the grade and the heat number travel with the parts on request
Where the drawing names a grade and an alternative would work, we say so with the difference in price and delivery rather than substituting it quietly.
WHAT BUYERS ASK
The questions that come with every titanium enquiry
Titanium enquiries arrive with the same set of questions, and all of them belong in the quotation rather than in a follow-up email.
- The route and the running time the price is based on, instead of a rate per kilogram
- Freight and delivery time on the same page as the unit price — EXW, DDP or air
- Surface finish as it comes off the machine, and what grinding adds where the drawing asks for Ra 0.4 μm
- Material certificates and traceability, with the heat number named on the certificate
- A quantity ladder at the volumes actually ordered, because the setup is spread across the batch
Every number in the quotation is one we hold on your parts. Where a figure depends on the drawing, it is quoted from the drawing rather than from a general price list.
FINISHING WITHOUT LOSING TOLERANCE
Finishing titanium without eating the tolerance
Titanium is finished after the dimensions are cut, so every finishing step has to leave the tolerance where it was. Grinding is used where the drawing asks for a fine surface; blasting and tumbling are used where the job is a uniform matte appearance.
- Grinding to Ra 0.4 μm where the drawing calls for it, with the dimension re-checked afterwards
- Threads and fits protected through blasting and handling so the fit is not altered
- Deburring done before inspection, not after, so the measured part is the part that ships
- Where the drawing specifies a coating or a colour code, the batch goes to a qualified finishing partner and comes back through our own inspection
Send a drawing with the grade, the critical callouts and the quantity, and you get a quoted route and a delivery date inside 48 hours.
QUOTING CHECKLIST
What to send for a titanium quotation
Titanium is priced on cutting time and tool wear, so the grade and the stock form matter more than the finished weight.
- Grade: commercially pure 2, 5, 5Al-2.5Sn or 6Al-4V, and the condition
- Stock form available and whether we buy it, since titanium stock is the long lead item
- The tightest tolerance and the surfaces it applies to
- Whether stress relief or heat treatment is required between roughing and finishing
- Surface requirement after machining, and whether any coating follows
- Quantity and whether the part repeats, because tooling strategy changes with volume
- Any requirement for material traceability to the mill heat number
Send what you have — a model without a drawing, or a drawing without a model, is enough to start the review.
Frequently Asked Questions
Can you machine titanium to the same tolerance as stainless?
The tolerance is the same, the route is longer. Titanium is held to ±0.005 mm on critical dimensions, with more passes and lighter cuts than the same part in stainless, because heat and deflection have to be managed.
Do you supply titanium with material certificates?
Yes. Certificates to EN 10204 3.1 naming the grade and the heat number are supplied on request, and the traceability from the certificate to the shipped batch is kept on file.
What surface finish can I expect on a titanium part?
Ra 0.8 μm as machined and Ra 0.4 μm after grinding. The value on the drawing is the one the inspection report quotes back with the measured values.
What titanium grades do you machine?
Ti-6Al-4V (Grade 5) and Ti-6Al-4V ELI (Grade 23) are standard, plus commercially pure grades. Material certs with mill heat numbers included.
How do you avoid work hardening and tool wear?
Rigid setups, low surface speeds and variable-flute tooling keep the cut zone stable — consistent tolerances over the whole batch.
Can titanium parts hold the same tolerance as steel?
Yes — ±0.005 mm on critical dimensions, verified on a CMM. Titanium rewards process discipline, which we have in place.
Do you provide material traceability?
Yes. Material certificates, CMM reports, FAI and inspection records are included — a complete traceable file per order.
Is titanium machining more expensive?
Material costs more per kilo and tool wear is 5–10× higher than aluminum, so expect 2–3× the machining cost of an equivalent aluminum part.
PRICING
What drives the price of Titanium Machining
Titanium Machining is quoted from the drawing, not from a catalogue: material block size, how many setups the geometry forces, the tolerance class and the batch size set the unit price. Machine-hour rates, material block prices and indicative bands at 1, 10 and 100 pieces are published in our CNC machining cost breakdown, so the number can be checked before a drawing is sent. A drawing review returns a quotation within 48 hours, with no minimum order quantity.
Have a Similar Part in Mind?
Send us your drawing — we review within 48h and return a quote with lead time.
Get a Quote →