


Technical Specifications
Capabilities at a Glance
Every number below is what we hold on your parts — CMM-verified, with free FAI on your first order.
| Tolerance | ±0.005mm on critical dimensions |
|---|---|
| Materials | Aluminum 7075/2024 · Titanium 6Al-4V · Inconel 718. Full material certs available on request. |
| Process | 5-Axis CNC Milling |
| Surface Finish | Bead Blasting · Anodizing II/III · Passivation (available on request) |
| Inspection | CMM report with measured values · free FAI |
| Lead Time | Production 4–8 months; prototypes faster. DDP door-to-door to EU and US. |
Buyer checklist
What to check before you order Aerospace Components
Most quote delays on Aerospace Components come from drawings that leave the material condition, the critical tolerances or the inspection documents open. These six points are confirmed before a price is issued.
- Material grade and condition: Aluminum 7075/2024 · Titanium 6Al-4V · Inconel 718. Full material certs available on request.
- Critical dimensions and the tolerance tied to them: ±0.005mm is what we hold where the drawing marks a feature critical.
- Surface roughness per functional face: Ra 1.6 µm is a typical as-machined value, and finer finishes are quoted on request.
- Surface treatment and masking: Bead Blasting · Anodizing II/III · Passivation (available on request)
- Quantity and delivery: Production 4–8 months; prototypes faster. DDP door-to-door to EU and US.
- Inspection documents: a CMM report with measured values, a free first-article report on new parts, and material certificates on request.
Process window by part type
| Feature | Typical tolerance | Surface roughness | How it is verified |
|---|---|---|---|
| Structural brackets | ±0.005mm | Ra 1.6 µm | CMM report, measured values |
| Mounting frames | ±0.005mm | Ra 1.6 µm | Free FAI on new parts |
| Thin-wall housings | ±0.005mm | Ra 1.6 µm | In-process check at each operation |
| Mating faces and bores | ±0.005mm | Ra 1.6 µm | CMM plus roughness check |
- Structural brackets for Aerospace Components are machined from Aluminum 7075/2024 and held to ±0.005mm on critical dimensions.
- Mounting frames are checked in process at every operation and ship with a CMM report of measured values.
- First articles for Aerospace Components come with a free inspection report, and material certificates are available on request.
- Orders for Aerospace Components start at one piece, because quantity changes the unit price rather than the process.
- The Dongguan plant that machines Aerospace Components holds ISO 9001:2015 certificate 93726Q00307R001.
- Prototypes of Aerospace Components ship in 5–7 business days, and production runs are quoted DDP with one invoice.
FAQ
Frequently Asked Questions
What tolerances do you hold on aerospace components?
±0.005mm on critical dimensions, verified on a CMM with full report included. Critical features like mating bores and mounting holes are dimensioned per your GD&T callouts.
Do you provide material traceability for flight applications?
Yes. We source certified bar stock (Aluminum 7075/2024, Titanium 6Al-4V, Inconel 718) with full material certificates on request — heat number, chemistry and mechanical properties are kept with the order file.
Can you machine thin-wall brackets and mounting frames without distortion?
Yes. Thin-wall aerospace brackets are machined with stress-relieved stock, balanced material removal and light finishing passes to hold flatness and avoid warping.
What is the typical lead time for aerospace parts?
4–8 months for qualified production, depending on quantity and material. Prototype quantities ship faster — send your drawing for a concrete schedule.
How do you handle surface finish and edge prep on flight parts?
Specified finishes include bead blasting, anodizing and passivation; edges are deburred and radiused per drawing. Ra 0.4μm achievable on functional surfaces.
Do you machine Inconel and titanium, and what is the cost impact?
Yes — Inconel 718 and Titanium 6Al-4V are standard for us. These materials cost more in tooling wear and machining time; a drawing review will show you the exact impact before you commit.
Buyer Guide
Buyer's Guide
How to Get a Quote for Aerospace Parts
Send STEP or IGES plus a PDF drawing with: material grade, quantity, surface finish, and any cert requirements (material certs, CMM report, FAI). We review within 48h and return a quote with lead time.
Material Selection Guide
Aluminum 7075 for strength-to-weight, 2024 for damage tolerance, Titanium 6Al-4V for high-temperature and fatigue-critical parts, Inconel 718 for hot sections. Tell us your operating environment and we will recommend a grade.
Machinability tips for Aerospace Machining
Avoid deep pockets with sharp internal corners (use radiused corners), keep wall thickness uniform to prevent distortion, and place datum features on one side of the part to simplify inspection.
Quality & Inspection
Every part is CMM-inspected with measured values on critical dimensions. FAI is free with every new part, and full dimensional reports are included with each order.
Lead Time & Shipping
Production lead time 4–8 months, prototypes faster. DDP door-to-door to EU and US — export, customs, duties and last-mile in one invoice, typically 4–6 business days in transit.
PRICING
What drives the price of Aerospace Components
Aerospace Components is quoted from the drawing, not from a catalogue: material block size, how many setups the geometry forces, the tolerance class and the batch size set the unit price. Machine-hour rates, material block prices and indicative bands at 1, 10 and 100 pieces are published in our CNC machining cost breakdown, so the number can be checked before a drawing is sent. A drawing review returns a quotation within 48 hours, with no minimum order quantity.
Get a Quote for Aerospace Components
Send us your drawing — we review within 48h and return a quote with lead time.
Get a Quote →