🏁 Motorsports Performance Parts

Capabilities at a Glance

Every number below is what we hold on your parts — CMM-verified, with free FAI on your first order.

Tolerance±0.005mm on critical dimensions
MaterialsAluminum 6061/7075 · Stainless 303/304 · Titanium Gr2/Gr5 · Chrome-moly steel — selected for strength, fatigue and weight.
Process5-Axis Milling + Turning
Surface FinishType II/III anodizing for aluminum (including hard anodize) · Passivation · Powder Coating (available on request)
InspectionCMM report with measured values · free FAI
Lead Time1–2.5 months typical; prototypes in 5–7 business days. Fast track for race-season deadlines.

What to check before you order Motorsports Performance Parts

Most quote delays on Motorsports Performance Parts come from drawings that leave the material condition, the critical tolerances or the inspection documents open. These six points are confirmed before a price is issued.

  1. Material grade and condition: Aluminum 6061/7075 · Stainless 303/304 · Titanium Gr2/Gr5 · Chrome-moly steel — selected for strength, fatigue and weight.
  2. Critical dimensions and the tolerance tied to them: ±0.005mm is what we hold where the drawing marks a feature critical.
  3. Surface roughness per functional face: Ra 1.6 µm is a typical as-machined value, and finer finishes are quoted on request.
  4. Surface treatment and masking: Type II/III anodizing for aluminum (including hard anodize) · Passivation · Powder Coating (available on request)
  5. Quantity and delivery: 1–2.5 months typical; prototypes in 5–7 business days. Fast track for race-season deadlines.
  6. Inspection documents: a CMM report with measured values, a free first-article report on new parts, and material certificates on request.

Process window by part type

FeatureTypical toleranceSurface roughnessHow it is verified
7075 brackets±0.005mmRa 1.6 µmCMM report, measured values
Brake and suspension parts±0.005mmRa 1.6 µmFree FAI on new parts
Titanium parts±0.005mmRa 1.6 µmIn-process check at each operation
Mating faces and bores±0.005mmRa 1.6 µmCMM plus roughness check
  • 7075 brackets for Motorsports Performance Parts are machined from Aluminum 6061/7075 and held to ±0.005mm on critical dimensions.
  • Brake and suspension parts are checked in process at every operation and ship with a CMM report of measured values.
  • First articles for Motorsports Performance Parts come with a free inspection report, and material certificates are available on request.
  • Orders for Motorsports Performance Parts start at one piece, because quantity changes the unit price rather than the process.
  • The Dongguan plant that machines Motorsports Performance Parts holds ISO 9001:2015 certificate 93726Q00307R001.
  • Prototypes of Motorsports Performance Parts ship in 5–7 business days, and production runs are quoted DDP with one invoice.

Frequently Asked Questions

  • What motorsports parts can you machine?

    Brake caliper brackets, suspension spacer sleeves, spring cups, adjuster screws, pedal boxes and custom billet components.

  • What materials do you use for performance parts?

    Aluminum 6061/7075, stainless 303/304, Titanium Gr2/Gr5 and chrome-moly steel — selected for strength, fatigue and weight.

  • What tolerances do you hold on safety-critical parts?

    ±0.005mm on critical dimensions, CMM-verified with full reports. Safety parts get free FAI and complete documentation.

  • Can you machine titanium brake and suspension parts?

    Yes. Titanium Gr2/Gr5 is machined with controlled process for strength-critical, weight-saving parts — expect longer machining time than aluminum.

  • What is your lead time for motorsports parts?

    1–2.5 months typical, prototypes in 5–7 business days. Fast track for race-season deadlines.

  • Do you anodize or coat performance parts?

    Yes — Type II/III anodizing for aluminum (including hard anodize), plus passivation and powder coating per your spec.

Buyer's Guide

  • How to Get a Quote for Motorsports Parts

    Send the drawing with: material, application (brake, suspension, drivetrain), load requirements, quantity, and target weight. Application context helps us recommend material and finish.

  • Material Selection Guide

    Aluminum 7075 for high-strength brackets, 6061 for cost-effective parts, titanium Gr5 for critical weight savings, chrome-moly for welded structures. Balance weight vs cost at the design stage.

  • Machinability tips for Performance Parts

    Design for machining from billet, keep wall thickness practical, and specify anodize allowance in finished dimensions — hard anodize adds thickness.

  • Quality & Inspection

    CMM inspection with full report, measured values, free FAI, material certs. Safety-critical parts fully documented.

  • Lead Time & Shipping

    1–2.5 months, prototypes 5–7 business days, fast track for race deadlines. DDP door-to-door with one invoice — export, customs, duties, last-mile.

What drives the price of Motorsports Performance Parts

Motorsports Performance Parts is quoted from the drawing, not from a catalogue: material block size, how many setups the geometry forces, the tolerance class and the batch size set the unit price. Machine-hour rates, material block prices and indicative bands at 1, 10 and 100 pieces are published in our CNC machining cost breakdown, so the number can be checked before a drawing is sent. A drawing review returns a quotation within 48 hours, with no minimum order quantity.

Get a Quote for Motorsports Performance Parts

Send us your drawing — we review within 48h and return a quote with lead time.

Get a Quote →