


Technical Specifications
Capabilities at a Glance
Every number below is what we hold on your parts — CMM-verified, with free FAI on your first order.
| Tolerance | ±0.005mm on critical dimensions |
|---|---|
| Materials | Stainless 303/304/316 · Alloy steel · Brass · Aluminum. Full material certs available on request. |
| Process | Turning + Grinding |
| Surface Finish | Passivation · Bead Blasting (available on request); zinc plating and Dacromet-type coatings arranged via our partners; anodizing for aluminum |
| Inspection | CMM report with measured values · free FAI |
| Lead Time | Fast track 1–2 months; prototypes in 5–7 business days. DDP door-to-door with one invoice. |
Buyer checklist
What to check before you order Custom Fasteners & Precision Hardware
Most quote delays on Custom Fasteners & Precision Hardware come from drawings that leave the material condition, the critical tolerances or the inspection documents open. These six points are confirmed before a price is issued.
- Material grade and condition: Stainless 303/304/316 · Alloy steel · Brass · Aluminum. Full material certs available on request.
- Critical dimensions and the tolerance tied to them: ±0.005mm is what we hold where the drawing marks a feature critical.
- Surface roughness per functional face: Ra 1.6 µm is a typical as-machined value, and finer finishes are quoted on request.
- Surface treatment and masking: Passivation · Bead Blasting (available on request); zinc plating and Dacromet-type coatings arranged via our partners; anodizing for aluminum
- Quantity and delivery: Fast track 1–2 months; prototypes in 5–7 business days. DDP door-to-door with one invoice.
- Inspection documents: a CMM report with measured values, a free first-article report on new parts, and material certificates on request.
Process window by part type
| Feature | Typical tolerance | Surface roughness | How it is verified |
|---|---|---|---|
| Threaded fasteners | ±0.005mm | Ra 1.6 µm | CMM report, measured values |
| Shaft collars | ±0.005mm | Ra 1.6 µm | Free FAI on new parts |
| Seal washers | ±0.005mm | Ra 1.6 µm | In-process check at each operation |
| Mating faces and bores | ±0.005mm | Ra 1.6 µm | CMM plus roughness check |
- Threaded fasteners for Custom Fasteners & Precision Hardware are machined from Stainless 303/304/316 and held to ±0.005mm on critical dimensions.
- Shaft collars are checked in process at every operation and ship with a CMM report of measured values.
- First articles for Custom Fasteners & Precision Hardware come with a free inspection report, and material certificates are available on request.
- Orders for Custom Fasteners & Precision Hardware start at one piece, because quantity changes the unit price rather than the process.
- The Dongguan plant that machines Custom Fasteners & Precision Hardware holds ISO 9001:2015 certificate 93726Q00307R001.
- Prototypes of Custom Fasteners & Precision Hardware ship in 5–7 business days, and production runs are quoted DDP with one invoice.
FAQ
Frequently Asked Questions
What custom fasteners can you machine?
Custom screws, studs, pins, standoffs and threaded hardware in any size and thread — made to your drawing, CMM-inspected.
What thread classes can you produce?
Unified, metric and special threads in common classes, with thread-form verification. NPT, BSP and ACME threads also available.
What materials and strengths do you offer?
Stainless 303/304/316, alloy steel (10.9/12.9 equivalent where applicable), brass and aluminum. Material certs available on request.
How do you protect fastener surfaces?
Passivation for stainless, zinc plating and Dacromet-type coatings via our partners, anodizing for aluminum. Specify your corrosion requirement and we'll match it.
What is the minimum order for custom fasteners?
No MOQ. We machine 1-piece samples for qualification and scale to 10,000+ piece runs with consistent quality.
How do you inspect small precision fasteners?
CMM and optical measurement for critical dimensions, thread gauges for form, with full inspection reports included on every order.
Buyer Guide
Buyer's Guide
How to Get a Quote for Custom Fasteners
Send the drawing with: thread spec (size, pitch, class), material and strength grade, coating or finish, quantity, and head/drive style. Complete thread info avoids rework.
Material Selection Guide
Stainless 303 for general fasteners, 316 for corrosion, alloy steel for high-strength applications, brass and aluminum for special uses. Match material to your environment and load.
Machinability tips for Fastener Machining
Specify thread length and undercut clearly, allow for coating thickness in final dimensions, and confirm drive style (hex, socket, Torx) for tooling access.
Quality & Inspection
CMM and optical inspection, thread-form gauging, measured values, free FAI, full reports included. Batch consistency verified at volume.
Lead Time & Shipping
Fast track 1–2 months, prototypes in 5–7 business days. DDP door-to-door with one invoice — export, customs, duties, last-mile.
PRICING
What drives the price of Custom Fasteners & Precision Hardware
Custom Fasteners & Precision Hardware is quoted from the drawing, not from a catalogue: material block size, how many setups the geometry forces, the tolerance class and the batch size set the unit price. Machine-hour rates, material block prices and indicative bands at 1, 10 and 100 pieces are published in our CNC machining cost breakdown, so the number can be checked before a drawing is sent. A drawing review returns a quotation within 48 hours, with no minimum order quantity.
Get a Quote for Custom Fasteners & Precision Hardware
Send us your drawing — we review within 48h and return a quote with lead time.
Get a Quote →